Canopy Creek HOA 2016

Development Guidelines

Storm Panels (Clearshield©, galvanized steel or aluminum) The color of all permanently affixed portions of the shutter assembly (such as mounting brackets) shall match the surface color to which it is attached.

Permanent

Accordion Windows/Doors Accordion shutters shall be used only on the rear and side elevations. The ARC may consider accordion shutters on the front elevation, if the shutters are fully hidden behind a well detailed window surround. The color of the shutters shall match the window frames, banding or other window surrounds. Roll-Up Shutters Roll-up shutters shall be concealed from view through use of awnings or through incorporation into the design of the soffit. If shutters are inside a screened patio, the shutters need not be concealed from view. The color of the tracks or any other permanently mounted component shall match the color of the surface color it is attached to. Colonial or Bahama Shutters This type of shutter will only be considered if submitted as part of the Plans for the ARC and Developer approval and are included as an element of the original architectural design submission or through a revised submission by the architect of record for the home. Slatted Aluminum Awnings The ‘Florida’ style slatted awnings with telescoping supports shall not be permitted in either a temporary or a permanent situation. Structured Wiring Distribution Panel This is the heart of the system. It is centrally located within the home, typically in a closet, the laundry room or the garage. All wires are to be home run to this point. This provides connection of TVs, telephones, and computer network devices while allowing for future upgrades. Types NOT Permitted

Other minimum specifications:

• 14”w x 24”h minimum enclosure. • Must be a nationally recognized product, readily available through nationwide distributors.

• Must have dedicated 120v 15 amp AC outlet, inside or directly below panel, and require earth grounding. • Must have 2” electrical conduit, 12” minimum bend radius, maximum of three 90 degree elbows, unoccupied, with pull string, running into attic for future expansion.

PAGE 15

WPB 889961.7